Nanjing Teflon Equipment Co. LTD

产品管理

Product Categories

DBY electric diaphragm pump

DBY electric diaphragm pump is suitable for all kinds of highly toxic, flammable, volatile liquid, all kinds of strong acid, strong alkali, strong corrosive media. It can transport particles up to 10mm in diameter, and has little wear to the pump when pumping mud and impurities. No need for irrigation, suction up to 7m, lift up to 50m. Through good performance, it can transport some medium that is not easy to flow, and has many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump. There are no rotating parts and no shaft seal diaphragm to completely separate the pumping medium from the moving parts of the pump and the working medium, and the conveyed medium will not leak outwards.

QBY pneumatic diaphragm pump

QBY pneumatic diaphragm pump is suitable for adhesives and glues, all kinds of tile, porcelain, pottery glaze, all kinds of abrasives, etchant, oil and mud. It can transport particles up to 10mm in diameter, and has little wear to the pump when pumping mud and impurities. No need for irrigation, suction up to 7m, lift up to 50m. Through good performance, it can transport some medium that is not easy to flow, and has many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump.

Corrosion resistant screw pump

LG single screw pump is a new type of pump that works on the principle of pull-rotary meshing positive displacement. The main working parts are eccentric screw (rotor) and fixed bushing (stator). Due to the special geometry of the two components, a separate sealed cavity is formed, and the medium flows uniformly from the axial direction, the internal flow rate is low, the volume remains unchanged, and the pressure is stable, because there is no vortex and agitation.

LG stainless steel screw pump

ZCQ stainless steel self-priming magnetic pump

ZCQ stainless steel self-priming magnetic pump adopts magnetic drive principle and external mixing structure, compared with ordinary centrifugal pump, ZCQ self-priming pump does not need to manually fill liquid before each start. Because it can self-priming, it is easy to remote centralized control and automatic operation, so it is widely used, especially for those installed above the liquid level, self-priming magnetic pump is the first choice.

ZX stainless steel self-priming pump

ZX type self-priming pump is a horizontal self-priming centrifugal pump, because the pump itself does not have a check valve, the structure is the simplest; Work the most reliable; Long working time, easy to maintain and use. Small size, light weight, high efficiency, in the design of the special consideration compared with the same caliber of the pump, large displacement, high performance. Applicable to urban environmental protection, construction, fire, chemical, pharmaceutical, dyeing, brewing, electricity, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading and so on.

Corrosion-resistant and wear-resistant mortar pump

Mortar pump adopts semi-open polymer impeller, lined with plastic layer of not less than 8mm, can be equipped with double-face circulating water machine seal, very wear-resistant.

UHB-ZK mortar pump

UHB-ZK mortar pump is a semi-open impeller, single-stage single-suction cantilever centrifugal pump, the flow parts are all made of ultra-high molecular weight polyethylene tight lining, lining layer is not less than 8mm. The bearing part of the pump is made of metal material, which can be equipped with fluorine rubber negative pressure sealing ring, plus cooling water device, and mechanical seal can also be configured. UHB-ZK mortar pump is suitable for phosphoric acid slurry, silica-containing fluorosilicate, mother liquor, etc. Zinc lead, gold, silver, copper manganese cobalt rare earth and other wet smelting of various acid, corrosive ore slurry electrolyte; Pickling system, sewage with impurities and other industries, suitable for both cleaning and slurry.

FZB fluoroplastic self-priming centrifugal pump

FZB type fluorine plastic self-priming centrifugal pump is suitable for low pool suction, tank truck raw material loading and unloading, short time empty operation conditions, gas-liquid mixed media, etc. FZB type fluorine plastic self-priming centrifugal pump is designed according to international standards, all flowing parts are tightly lined with fluorine plastic, and the bearing part of the pump is metal. External single-end machine seal, external all-in-one machine seal and flushing water can be configured, and the flushing scheme can be customized according to API682 standard.

ZFT lined fluorine self-priming magnetic pump

ZFT line fluorine self-priming magnetic pump is suitable for low water pool suction, tank truck raw material loading and unloading, short time empty operation conditions, gas-liquid mixed media, but also suitable for all kinds of acid, alkali, salt, organic solvent transport. ZFT series self-priming magnetic pump, fully combines the advantages of magnetic pump and self-priming pump, both self-priming function, but also cancel the shaft seal, the use of magnetic indirect transmission, completely eliminate the phenomenon of dripping.

→
18795855808
Teflon-pump@aliyun.com
Address: 12 Shuanglong North Road, Jiangbei New District, Nanjing City, Jiangsu Province
Teflonpump1
teflonpump
18795855808
id860359919

产品管理

Tell me what you need