Nanjing Teflon Equipment Co. LTD

energy-efficient

Featured products

CQB-P stainless steel magnetic pump flow parts are all made of stainless steel, organic acids, organic compounds, alkali, alkaline salt solution have good corrosion resistance, the grinding material selection of silicon carbide to silicon carbide, the two will form a liquid film after contact the shaft and sleeve, will not wear, to ensure the life of the product.
The corrosion-resistant submersible sewage pump is a liquid pump product that connects the pump with the motor and works underwater at the same time.
WQ submersible sewage pump is a pump and motor connected, and at the same time submerged under the liquid work pump products.
Long shaft vertical centrifugal pump is widely used to transport acid and alkali, organic solvents, strong oxidants and other corrosive media, the use temperature is -20℃~ 85℃. FYH type plastic liquid pump is a long shaft vertical centrifugal pump, the contact liquid part is all welded by plastic, with a wide range of corrosion resistance, high efficiency, light weight, no need to pump water, easy maintenance and so on.
FYH fluorine plastic liquid pump is widely used to transport acid and alkali, organic solvents, strong oxidants and other corrosive media, the use temperature is -20℃ to 85℃. FYH type plastic liquid pump is a long shaft vertical centrifugal pump, its contact liquid part is all welded by plastic, with a wide range of corrosion resistance, high efficiency, light weight, no need for irrigation can be pumped, easy maintenance, etc.
LG single screw pump is a new type of pump that works on the principle of pull-rotary meshing positive displacement. The main working parts are eccentric screw (rotor) and fixed bushing (stator). Due to the special geometry of the two components, a separate sealed cavity is formed, and the medium flows uniformly from the axial direction, the internal flow rate is low, the volume remains unchanged, and the pressure is stable, because there is no vortex and agitation.
LG single screw pump is a new type of pump that works on the principle of pull-rotary meshing positive displacement. The main working parts are eccentric screw (rotor) and fixed bushing (stator). Due to the special geometry of the two components, a separate sealed cavity is formed, and the medium flows uniformly from the axial direction, the internal flow rate is low, the volume remains unchanged, and the pressure is stable, because there is no vortex and agitation.
ZCQ stainless steel self-priming magnetic pump adopts magnetic drive principle and external mixing structure, compared with ordinary centrifugal pump, ZCQ self-priming pump does not need to manually fill liquid before each start. Because it can self-priming, it is easy to remote centralized control and automatic operation, so it is widely used, especially for those installed above the liquid level, self-priming magnetic pump is the first choice.
ZX type self-priming pump is a horizontal self-priming centrifugal pump, because the pump itself does not have a check valve, the structure is the simplest; Work the most reliable; Long working time, easy to maintain and use. Small size, light weight, high efficiency, in the design of the special consideration compared with the same caliber of the pump, large displacement, high performance. Applicable to urban environmental protection, construction, fire, chemical, pharmaceutical, dyeing, brewing, electricity, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading and so on.
Mortar pump adopts semi-open polymer impeller, lined with plastic layer of not less than 8mm, can be equipped with double-face circulating water machine seal, very wear-resistant.

Tell me what you need