Nanjing Teflon Equipment Co. LTD

factory outlet

Featured products

CQB-P stainless steel magnetic pump flow parts are all made of stainless steel, organic acids, organic compounds, alkali, alkaline salt solution have good corrosion resistance, the grinding material selection of silicon carbide to silicon carbide, the two will form a liquid film after contact the shaft and sleeve, will not wear, to ensure the life of the product.
LG single screw pump is a new type of pump that works on the principle of pull-rotary meshing positive displacement. The main working parts are eccentric screw (rotor) and fixed bushing (stator). Due to the special geometry of the two components, a separate sealed cavity is formed, and the medium flows uniformly from the axial direction, the internal flow rate is low, the volume remains unchanged, and the pressure is stable, because there is no vortex and agitation.
LG single screw pump is a new type of pump that works on the principle of pull-rotary meshing positive displacement. The main working parts are eccentric screw (rotor) and fixed bushing (stator). Due to the special geometry of the two components, a separate sealed cavity is formed, and the medium flows uniformly from the axial direction, the internal flow rate is low, the volume remains unchanged, and the pressure is stable, because there is no vortex and agitation.
ZCQ stainless steel self-priming magnetic pump adopts magnetic drive principle and external mixing structure, compared with ordinary centrifugal pump, ZCQ self-priming pump does not need to manually fill liquid before each start. Because it can self-priming, it is easy to remote centralized control and automatic operation, so it is widely used, especially for those installed above the liquid level, self-priming magnetic pump is the first choice.
ZX type self-priming pump is a horizontal self-priming centrifugal pump, because the pump itself does not have a check valve, the structure is the simplest; Work the most reliable; Long working time, easy to maintain and use. Small size, light weight, high efficiency, in the design of the special consideration compared with the same caliber of the pump, large displacement, high performance. Applicable to urban environmental protection, construction, fire, chemical, pharmaceutical, dyeing, brewing, electricity, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading and so on.
Mortar pump adopts semi-open polymer impeller, lined with plastic layer of not less than 8mm, can be equipped with double-face circulating water machine seal, very wear-resistant.
UHB-ZK mortar pump is a semi-open impeller, single-stage single-suction cantilever centrifugal pump, the flow parts are all made of ultra-high molecular weight polyethylene tight lining, lining layer is not less than 8mm. The bearing part of the pump is made of metal material, which can be equipped with fluorine rubber negative pressure sealing ring, plus cooling water device, and mechanical seal can also be configured. UHB-ZK mortar pump is suitable for phosphoric acid slurry, silica-containing fluorosilicate, mother liquor, etc. Zinc lead, gold, silver, copper manganese cobalt rare earth and other wet smelting of various acid, corrosive ore slurry electrolyte; Pickling system, sewage with impurities and other industries, suitable for both cleaning and slurry.
FZB type fluorine plastic self-priming centrifugal pump is suitable for low pool suction, tank truck raw material loading and unloading, short time empty operation conditions, gas-liquid mixed media, etc. FZB type fluorine plastic self-priming centrifugal pump is designed according to international standards, all flowing parts are tightly lined with fluorine plastic, and the bearing part of the pump is metal. External single-end machine seal, external all-in-one machine seal and flushing water can be configured, and the flushing scheme can be customized according to API682 standard.
GDF fluoroplastic pipeline pump is suitable for chlor-alkali, chlorobenzoic, formation foil, pickling, pesticide, medicine and other industries of highly corrosive media transport. Designed according to international standards, the flow parts are all tightly lined with fluorine plastic, and the bearing part of the pump is metal material. The vertical design of the GDF fluorine-lined pipeline pump covers a small area, and the inlet and outlet are in a horizontal line, which can be used for pressurization of limited space or straight lines.
GDF fluoroplastic pipeline pump is suitable for chlor-alkali, chlorobenzoic, formation foil, pickling, pesticide, medicine and other industries of highly corrosive media transport. Designed according to international standards, the flow parts are all tightly lined with fluorine plastic, and the bearing part of the pump is metal material. The vertical design of the GDF fluorine-lined pipeline pump covers a small area, and the inlet and outlet are in a horizontal line, which can be used for pressurization of limited space or straight lines.

Tell me what you need