When the acid- and alkali-resistant magnetic pump is transporting some media that are easy to crystallize and precipitate, the equipment needs to be cleaned in time after transportation. The correct cleaning method can ensure the quality of cleaning and reduce the cost of cleaning. So how should the equipment be cleaned? This requires mastering the correct cleaning method.
1. When cleaning the acid and alkali resistant magnetic pump, it includes cleaning the external surface of the equipment and cleaning some parts. Because people have different purposes for cleaning parts, the cleaning of parts also includes cleaning before installation, as well as cleaning of plated covers and bonded parts.
2. When cleaning the acid-resistant and alkali-resistant magnetic pump, the scale and rust on the impeller and bearing of the equipment should be cleaned. The rust and scale should be scraped off, and then cleaned with water and blown clean with compressed air. Some oil stains or rust may accumulate at the joint of the pump housing, which should also be cleaned. The water seal pipe should also be cleaned to ensure that the water seal pipe can be unobstructed. The position of the bearing and bearing should also be cleaned to clean the oil stains on it, and then the oil ring and oil level gauge should be cleaned. The ball bearing should be cleaned with gasoline. For some parts that do not need to be installed, a layer of protective oil should be applied after cleaning.
When using the acid and alkali resistant magnetic pump, it must be cleaned frequently to ensure that the equipment can operate in good condition and has a long service life. When cleaning, different cleaning agents should be used for different parts, and different cleaning methods should be adopted to ensure higher cleaning quality.
